125mm Continuous Rim Diamond Blade with 10mm Segment

Updated: 2026-10-08

The 125mm Continuous Rim Diamond Blade with 10mm Segment is listed for stone cutting. Its suitability depends on the workpiece and machine setup, so the diameter marking should be checked together with stone abrasiveness, slab thickness and required edge quality.

Product reference: Keep reference #3160 on the enquiry, sample label and approval record.

Dimensions and listed application

• Diameter: 125mm
• Bore: 22.23mm
• Segment height: 10mm
• Thickness: 1.8mm
• Applications: granite, sandstone, rock slabs, marble cutting.

The catalogue dimensions, 125mm and 22.23mm, need to be read with the machine RPM and flange data. Record those values on the purchase specification.

Application review

Listed use: granite, sandstone, rock slabs, marble cutting.. The continuous rim is intended for buyers who place edge control ahead of aggressive chip clearance.

The stone cutting category contains other dimensions for comparison.

How this reference differs

This 125mm design uses a continuous rim and a listed 10mm segment. Compare it with other continuous-rim blades for edge quality, while corrugated or segmented products should be assessed separately. Confirm coolant requirements from the approved drawing before choosing the operating method. Ask for the core thickness, segment width and maximum RPM on the final document. A continuous rim test should record exit-edge chipping and heat rather than using the same acceptance target as a segmented dry blade.

Data needed before pricing

For an OEM quotation, provide the machine model, RPM, material, cutting depth, wet or dry method, quantity and destination. Add artwork and packaging instructions for a private-label order.

Evaluating the first sample

Inspect the blade before mounting and carry out a short no-load check in a safe area. During cutting, follow the machine instructions and stop when sound, resistance or vibration changes.

Send a product enquiry and include reference #3160 with the machine and material details.