125mm Corrugated Ceramic Tile Blade with 1.4mm Thickness

Updated: 2026-10-08

Use the 125mm Corrugated Ceramic Tile Blade with 1.4mm Thickness specification when comparing a sample for ceramic and tile cutting. The practical selection question is whether its rim, dimensions and operating method suit ceramic tile, porcelain, rock slab or similar sheet material.

Product reference: Keep reference #3164 on the enquiry, sample label and approval record.

Dimensions and listed application

• Diameter: 125mm
• Bore: 22.23mm
• Segment height: 10mm
• Thickness: 1.4mm
• Applications: ceramics, tiles, rock slabs, microcrystalline stone cutting.

Match 125mm to the machine’s permitted blade range and verify the 22.23mm bore against the spindle. Also compare the blade speed rating with the machine’s no-load RPM.

Application review

Listed use: ceramics, tiles, rock slabs, microcrystalline stone cutting.. The patterned rim should be evaluated for debris clearance, cooling and the required edge finish on the intended material.

The ceramic and tile cutting category contains other dimensions for comparison.

What the factory needs from the buyer

The OEM brief should identify the machine, spindle, RPM, material and desired balance between speed, finish and service life. Commercial terms should refer to the approved sample or drawing.

Sample acceptance checks

Inspect the blade before mounting and carry out a short no-load check in a safe area. During cutting, follow the machine instructions and stop when sound, resistance or vibration changes.

Send a product enquiry and include reference #3164 with the machine and material details.