125mm Dry Cutting Diamond Blade for Stone

Updated: 2026-10-08

The 125mm Dry Cutting Diamond Blade for Stone is listed for stone cutting. Its suitability depends on the workpiece and machine setup, so the diameter marking should be checked together with stone abrasiveness, slab thickness and required edge quality.

Product reference: Catalogue #3152 identifies this configuration during sampling and quotation.

Dimensions and listed application

• Diameter: 125mm
• Bore: 22.23mm
• Segment height: 10mm
• Thickness: 1.8mm
• Applications: granite, sandstone, rock slabs, marble cutting.

The dimensional starting points are 125mm for diameter and 22.23mm for the bore. Check flange contact, guard clearance and rotation direction during sample setup.

What this design should be checked against

Listed use: granite, sandstone, rock slabs, marble cutting.. For approved dry cutting, use controlled passes and cooling intervals instead of forcing the blade through the workpiece.

The stone cutting category contains other dimensions for comparison.

Ordering and private-label details

For an OEM quotation, provide the machine model, RPM, material, cutting depth, wet or dry method, quantity and destination. Add artwork and packaging instructions for a private-label order.

Evaluating the first sample

A controlled sample test is more useful than a general claim. Keep material, operator, cooling and feed conditions consistent, and photograph the edge and wear pattern after the test.

Send a product enquiry and include reference #3152 with the machine and material details.