125mm General-Purpose Dry Cutting Stone Blade

Updated: 2026-10-08

This page records the working specification for the 125mm General-Purpose Dry Cutting Stone Blade. It is intended as a comparison point for stone cutting enquiries involving granite, marble, sandstone or the stone named in the enquiry.

Product reference: The traceable catalogue reference for this design is #3170.

Dimensions and listed application

• Diameter: 125mm
• Bore: 22.23mm
• Segment height: 10mm
• Thickness: 1.8mm
• Applications: granite, sandstone, rock slabs, marble cutting.

The dimensional starting points are 125mm for diameter and 22.23mm for the bore. Check flange contact, guard clearance and rotation direction during sample setup.

Cutting method and material

Listed use: granite, sandstone, rock slabs, marble cutting.. For approved dry cutting, use controlled passes and cooling intervals instead of forcing the blade through the workpiece.

The stone cutting category contains other dimensions for comparison.

How this reference differs

This 125mm entry is presented as a general-purpose dry stone blade rather than a continuous-rim wet blade. Focus the sample review on the actual stone mix and dust-control method. General-purpose wording does not approve the blade for every aggregate, reinforced section or handheld machine. Ask whether reinforcement may be encountered and define the maximum cut depth. A short trial in representative material should be completed before the product is approved for recurring site work. Record dust extraction, pass depth and recovery time between cuts. Those conditions are especially useful when comparing this general-purpose reference with a dedicated granite blade or a continuous-rim alternative.

Ordering and private-label details

A useful purchase enquiry includes arbor size, machine speed, material name, thickness, cooling method and target quantity. These details allow the factory to check the requested configuration before pricing.

How to validate the blade

Approve the specification from repeatable test results on the buyer’s material. Keep the guard installed, stay within the speed rating and remove a damaged blade from service.

Send a product enquiry and include reference #3170 with the machine and material details.