105mm K-Type Corrugated Ceramic Tile Blade

Updated: 2026-10-08

The 105mm K-Type Corrugated Ceramic Tile Blade is listed for ceramic and tile cutting. Its suitability depends on the workpiece and machine setup, so the diameter marking should be checked together with edge finish, tile hardness and chipping tolerance.

Product reference: Use reference #2760 when asking for current availability or a revised drawing.

Blade data for quotation

• Diameter: 105mm
• Bore: 20mm
• Segment height: 10mm
• Thickness: 1.2mm
• Applications: ceramics, tiles, rock slabs, microcrystalline stone cutting.

Match 105mm to the machine’s permitted blade range and verify the 20mm bore against the spindle. Also compare the blade speed rating with the machine’s no-load RPM.

Rim and material fit

Listed use: ceramics, tiles, rock slabs, microcrystalline stone cutting.. The patterned rim should be evaluated for debris clearance, cooling and the required edge finish on the intended material.

Alternative sizes and rim styles are listed under ceramic and tile cutting.

How this reference differs

The K-type corrugated profile distinguishes this 105mm tile blade from mesh, small-ripple and continuous-rim references. A useful trial compares edge finish and debris clearance at the same speed. Confirm the profile drawing before using the product name as a substitute for dimensional approval.

What the factory needs from the buyer

For an OEM quotation, provide the machine model, RPM, material, cutting depth, wet or dry method, quantity and destination. Add artwork and packaging instructions for a private-label order.

Evaluating the first sample

Use the same machine settings when comparing samples. Note cutting time, chipping, noise and wear, then inspect the core and rim before the next run.

Send a product enquiry and include reference #2760 with the machine and material details.