110mm Deep-Hole Design Dry Cutting Stone Blade

Updated: 2026-10-08

Use the 110mm Deep-Hole Design Dry Cutting Stone Blade specification when comparing a sample for stone cutting. The practical selection question is whether its rim, dimensions and operating method suit granite, marble, sandstone or the stone named in the enquiry.

Product reference: Catalogue #2580 identifies this configuration during sampling and quotation.

Working specification

• Diameter: 110mm
• Bore: 20mm
• Segment height: 10mm
• Thickness: 1.8mm
• Applications: granite, sandstone, rock slabs, marble cutting.

Match 110mm to the machine’s permitted blade range and verify the 20mm bore against the spindle. Also compare the blade speed rating with the machine’s no-load RPM.

What this design should be checked against

Listed use: granite, sandstone, rock slabs, marble cutting.. For approved dry cutting, use controlled passes and cooling intervals instead of forcing the blade through the workpiece.

Browse the related stone cutting range when another rim pattern or size may be more suitable.

What the factory needs from the buyer

The OEM brief should identify the machine, spindle, RPM, material and desired balance between speed, finish and service life. Commercial terms should refer to the approved sample or drawing.

Sample acceptance checks

A controlled sample test is more useful than a general claim. Keep material, operator, cooling and feed conditions consistent, and photograph the edge and wear pattern after the test.

Send a product enquiry and include reference #2580 with the machine and material details.