114–230mm Wall Chasing Diamond Blade Series

Updated: 2026-10-08

The 114–230mm Wall Chasing Diamond Blade Series is an OEM-ready blade reference for wall chasing and construction cutting. Before quotation, the buyer and manufacturer should agree on channel width, cut depth and possible reinforcement, the machine interface and the test method.

Product reference: Reference #2549 separates this blade from similar sizes in the range.

Product specification

• Diameter: 114mm-230mm
• Bore: 20mm/22.23mm/25.4mm
• Segment height: 15mm
• Thickness: 1.8mm-2.6mm
• Application: wall trenching concrete cutting

Match 114mm-230mm to the machine’s permitted blade range and verify the 20mm/22.23mm/25.4mm bore against the spindle. Also compare the blade speed rating with the machine’s no-load RPM.

Design considerations

Listed use: wall trenching concrete cutting. Confirm the rim design against the material, machine power, cutting method and required finish before placing a volume order.

See more wall chasing and construction cutting product references for another cutting method or rim design.

What the factory needs from the buyer

To compare quotations fairly, send every supplier the same material, machine and output requirements. Shandong Huada Jinke New Materials Co., Ltd. can then confirm the drawing, sample quantity and schedule.

Before a volume order

Check bore fit, rotation direction and maximum RPM before the trial. After cutting, compare segment wear on both sides; uneven wear can indicate alignment or coolant problems.

Send a product enquiry and include reference #2549 with the machine and material details.