114mm PDC Point-Guard Wall Chasing Blade

Updated: 2026-10-08

The 114mm PDC Point-Guard Wall Chasing Blade is listed for wall chasing and construction cutting. Its suitability depends on the workpiece and machine setup, so the diameter marking should be checked together with channel width, cut depth and possible reinforcement.

Product reference: Quote catalogue reference #2560 so the drawing and sample remain linked to this page.

Working specification

• Diameter: 114mm
• Bore: 20mm
• Segment height: 15mm
• Thickness: 1.8mm
• Applications: Wall channel cutting, concrete cutting

The stated diameter is 114mm, with bore information shown as 20mm. Measure the spindle and check the guard capacity before choosing a reduction ring or flange arrangement.

Selecting the application

Listed use: Wall channel cutting, concrete cutting. Confirm the rim design against the material, machine power, cutting method and required finish before placing a volume order.

Browse the related wall chasing and construction cutting range when another rim pattern or size may be more suitable.

Preparing an OEM enquiry

For an OEM quotation, provide the machine model, RPM, material, cutting depth, wet or dry method, quantity and destination. Add artwork and packaging instructions for a private-label order.

Evaluating the first sample

Run the first sample on the intended material and record cut length, feed method, edge condition and rim wear. Stop the trial if vibration, cracks, runout or segment damage appears.

Send a product enquiry and include reference #2560 with the machine and material details.