125mm Continuous Rim Wet & Dry Cutting Blade

Updated: 2026-10-08

The 125mm Continuous Rim Wet & Dry Cutting Blade is an OEM-ready blade reference for stone cutting. Before quotation, the buyer and manufacturer should agree on stone abrasiveness, slab thickness and required edge quality, the machine interface and the test method.

Product reference: Keep reference #2973 on the enquiry, sample label and approval record.

Reference dimensions

• Diameter: 125mm
• Bore: 22.23mm
• Segment height: 10mm
• Thickness: 1.8mm
• Applications: granite, sandstone, rock slabs, marble cutting.

Before fitting this design, confirm that the machine accepts 125mm and the stated 22.23mm bore. Do not enlarge the arbor hole or operate without the intended guard.

Application review

Listed use: granite, sandstone, rock slabs, marble cutting.. The continuous rim is intended for buyers who place edge control ahead of aggressive chip clearance. For approved dry cutting, use controlled passes and cooling intervals instead of forcing the blade through the workpiece. For wet cutting, confirm that the machine can deliver clean water to both sides of the rim.

Review the full stone cutting selection if the listed dimensions do not match the machine.

How this reference differs

This 125mm continuous-rim reference is listed for wet and dry cutting. Confirm that wording against the final drawing and machine instructions; it does not make every method interchangeable. Record whether the sample used water because cooling changes the comparison.

Building the purchase specification

To compare quotations fairly, send every supplier the same material, machine and output requirements. Shandong Huada Jinke New Materials Co., Ltd. can then confirm the drawing, sample quantity and schedule.

Before a volume order

Inspect the blade before mounting and carry out a short no-load check in a safe area. During cutting, follow the machine instructions and stop when sound, resistance or vibration changes.

Send a product enquiry and include reference #2973 with the machine and material details.