110mm Corrugated Continuous Rim Stone Blade

Updated: 2026-10-08

The 110mm Corrugated Continuous Rim Stone Blade is listed for stone cutting. Its suitability depends on the workpiece and machine setup, so the diameter marking should be checked together with stone abrasiveness, slab thickness and required edge quality.

Product reference: Keep reference #2456 on the enquiry, sample label and approval record.

Reference dimensions

• Diameter: 110mm
• Bore: 20mm
• Segment height: 10mm
• Thickness: 1.1mm
• Applications: granite, sandstone, rock slabs, marble cutting.

A quotation based only on 110mm is incomplete. Confirm the 20mm bore, maximum speed, flange arrangement and available guard clearance as one machine-fit check.

Application review

Listed use: granite, sandstone, rock slabs, marble cutting.. The continuous rim is intended for buyers who place edge control ahead of aggressive chip clearance. The patterned rim should be evaluated for debris clearance, cooling and the required edge finish on the intended material.

Review the full stone cutting selection if the listed dimensions do not match the machine.

OEM drawing and commercial details

For an OEM quotation, provide the machine model, RPM, material, cutting depth, wet or dry method, quantity and destination. Add artwork and packaging instructions for a private-label order.

Evaluating the first sample

Inspect the blade before mounting and carry out a short no-load check in a safe area. During cutting, follow the machine instructions and stop when sound, resistance or vibration changes.

Send a product enquiry and include reference #2456 with the machine and material details.